Sale!
,

MJX Hyper Go 14210 Brushless High Speed RC Car -V2 model

Original price was: $178.99.Current price is: $168.99.

+ Free Shipping

MJX 14210 update notification:
1. Replace the universal telescopic transmission shaft on the rear axle.
2. Updated the swing arm.
3. Add 4 additional accessories for the front swing arm.
4. Upgrade of pull rod components
5. Most of the vehicle body screws are replaced with internal hexagonal screws

SKU: 14210 Categories: ,

RTR Built for Extreme Speed Bashing: Rugged chassis components, including steel differential outdrives and metal gearbox internals, a heavy-duty drivetrain, durable steel universal telescopic drive shaft, and more contribute to unstoppable bashing performance. The composite front bumper let you fearlessly tackle almost anything that stands in your way.

Aluminum Alloy Chassis: Made of 6061 aluminum, the laser-etched chassis plate with a metal center body support and strong composite brace for maximum durability.

Brushless Extreme Speed Truggy: Hobby 2852 4400KV, 4 pole high-torque motor with metal heatsink and cooling fans design. Independent receiver and 45A ESC (compatible 2S/3S battery) make this car more potential and upgradeable.

Release the Monster: The factory speed limit is 33 mph, just press 5 times switch to unlock the speed lock of this monster truck, and the 3S with the car can reach an amazing speed of 45+ mph (73 km/h), super fast 50 mph (80 km/h) speeds achievable in optimum conditions using an Angry Snail 3S2000 battery. (Angry Snail 3S2000 11.1V LiPo battery and more upgrade accessories available )

Driving Quality: The tire (Pre-mounted sponge inserted) and oil-filled absorbers greatly reduce the shaking of the truck when driving at high speed. The new design adjustable, oil-filled shocks, keep you confidently in control.

Transmitter: 300+ FT 2.4GHz 3-Channel Radio with light control, ST/TH Trim function are available. New bashers will be able to set throttle limits at 70% until they are ready to use the full speed potential.

Power system:
ESC:45A (With aluminum heat sink)
Motor:brushless 2852 (with hot sink and fan)
Servo:19g digital servo 2.2kg.cm
Transmitter:
Frequency:2.4 GHZ
Battery: 3XAA battery(not included)
Battery:
7.4V 3000mah 25C Li-po

Others:
Charge time:180min
Using time:10 min
Control distance:120m
Function:forward,backward,left,right
Proportional control:proportional control
Using time:10 min
Control distance:120m
Function:forward,backward,left,right
Proportional control:proportional control

Dimension:
Size:320*230*124mm
Wheelbase:198mm
Axle Base:188mm
Tire diameter:90mm
Package included:
1x Car body (including battery)
1x Manual
1x USB charging cable
1x Hex wrench
1x screwdriver
4x Sand digging tire
1x golden car shell (this car with 2 car shells,one is black,one is gold)

Stands up to Bashing’s drivetrain
Efficient and durable metal transmission makes 4WD virtually unstoppable strength. Redesigned all-metal internals throughout for handling greater power.

The laser-etched 6061 aluminum chassis
The metal center body support throughout its fully assembled laser-etched chassis give the 1/14 scale HYPER GO Truck virtually unstoppable strength.

The Real 1/14 Scale
Full size 323mm, wheel base 201mm, wheel diameter 92mm, 12mm wheel hex makes more tire options.

Speed Limited Switch
Transmitter: 300+ FT 2.4GHz 3-Channel Radio with light control, ST/TH Trim function are available. New bashers will be able to set throttle limits at 70% until they are ready to use the full speed potential.

2852 brushless motor (cooling fan), independent receiver, 45A independent brushless ESC with cooling fan (compatible with 3S battery), chromium steel gear differential, chromium steel + powder metallurgy gear, metal chassis

 

Rugged chassis components, including steel differential outdrives and metal gearbox internals, a heavy-duty drivetrain, durable steel universal telescopic drive shaft, and more contribute to unstoppable bashing performance.

color

color

Shopping Cart